Oyena Mboneleli weZifakelo zeHydraulic

Iminyaka eyi-15 yamava okuVelisa
iphepha

Swivel ORFS Tube End Reducer |Ukugqithisela ngolwelo olusebenzayo

Swivel ORFS Tube End Reducer |Ugqithiso lolwelo oluFanelekileyo loMfanekiso
  • Swivel ORFS Tube End Reducer |Ukugqithisela ngolwelo olusebenzayo
  • Swivel ORFS Tube End Reducer |Ukugqithisela ngolwelo olusebenzayo
  • Swivel ORFS Tube End Reducer |Ukugqithisela ngolwelo olusebenzayo

Inkcazelo emfutshane:

Le Tube End Reducer ibonisa i-ORFS yokuyila i-swivel, kwaye ivumela ukujikeleza kwe-360-degree of fitting, iqinisekisa uqhagamshelwano olukhuselekileyo noluthembekileyo phakathi kweetyhubhu okanye i-hoses.


  • SKU:STRLON

    • Iinkcukacha zeMveliso

    Iithegi zeMveliso

    1. OkuI-Swivel ORFS Tube End Reducerifaka i-nut, umzimba, i-O-ring, kunye nomkhono ukwenza uqhagamshelwano olusebenzayo nolungenakuvuza.

    2. Oku kufakwa kunokwamkela uluhlu lweetyhubhu ezinobungqingqwa kwaye zisetyenziswe kunye nombhobho, iityhubhu ye-intshi, okanye iityhubhu ye-metric ukwenzela ukuguquguquka okukhulu xa kumiselwa iisistim zehydraulic.

    3. Eyakhelwe kwintsimbi yezinga eliphezulu, uyilo oluchanekileyo lwe-swivel luqinisekisa ukusebenza kwexesha elide naphantsi kweemeko ezinzima.

    4. Nge-ORFS swivel iphela kwelinye icala kunye ne-ORFS ityhubhu iphela kwelinye, le ityhubhu yokuphelisa i-reducer inikezela ngokukhawuleza kunye nofakelo olungenamsebenzi kuyo nayiphi na inkqubo ye-hydraulic.

    5. Ngoyilo lobunjineli obuphezulu kunye nolwakhiwo oluchanekileyo, oku kulungelelaniswa kuqinisekisa uxhulumaniso olukhuselekileyo noluthembekileyo ngelixa kunciphisa iimfuno zokugcinwa kunye nokulungiswa.

    I-TUBE FITTING ICANDELO NO.
    SIZE
    F (intshi)
    UXINEZELEKO OLUDINYO
    (X1000 PSI)
    STRLON STRLON I-STRLO
    1 PC DESIGN (W/ CRIMP NUT) 2 PC DESIGN (W/ INUT ENKULU) UMZIMBA KUPHELA (KWE-PC EZI-2 KUPHELA) 1 (intshi) ii-intshi ezi-2)
    6-4 ISTRLON - - 3/8 1/4 0.77 9.2 9.2
    - 8-4 ISTRLON 8-4 STRLO 1/2 1/4 0.87 9.2 9.2
    8-6 STRLON - - 1/2 3/8 0.89 9.2 9.2
    - 10-4 STRLON 10-4 STRLO 5/8 1/4 0.91 6 6
    - 10-6 STRLON 10-6 STRLO 5/8 3/8 0.94 6 6
    - 10-8 STRLON 10-8 STRLO 5/8 1/2 1 6 6
    - 12-4 ISTRLON 12-4 STRLO 3/4 1/4 0.98 6 6
    - 12-6 ISTRLON 12-6 STRLO 3/4 3/8 1.08 6 6
    - 12-8 STRLON 12-8 STRLO 3/4 1/2 1.08 6 6
    12-10 ISTRLON - - 3/4 5/8 1.16 6 6
    - 16-8 STRLON 16-8 STRLO 1 1/2 1.14 6 6
    - 16-10 ISTRLON 16-10 STRLO 1 5/8 1.26 6 6
    16-12 ISTRLON - - 1 3/4 1.3 6 6
    - 20-12 STRLON 20-12 STRLO 1 1/4 3/4 1.32 5 5
    20-16 ISTRLON - - 1 1/4 1 1.34 5 5
    - 24-12 ISTRLON-S - 1 1/2 3/4 1 5 5
    - 24-16 ISTRLON 24-16 STRLO 1 1/2 3/4 1.32 4 4
    - 24-16 ISTRLON 24-16 STRLO 1 1/2 1 1.34 4 4
    - 24-20 STRLON 24-20 STRLO 1 1/2 1 1.34 4 4
    - 32-20 STRLON** 32-20 STRLO** 2 1 1/4 1.42 3 3
    - 32-24 STRLON** 32-24 STRLO** 2 1 1/2 1.42 3 3

    * Idityaniswe kunye ne-crimp nut.

    ** Idityaniswe kunye ne-BL nut enkulu.

    ***Uku-odola isinciphisi ngaphandle kwe-nut enkulu (umzimba kuphela) susa u-“N” kwinombolo yendawo (okt, STRLO).

    I-Tube End Reducer ene-ORFS Swivel / ORFS Tube End, isisombululo esisebenza kakhulu sokuphelisa ukuvuza kwiinkqubo ze-hydraulic ezisebenza kuxinzelelo oluphezulu.Oku kufakwa kudidi lwe-O-Ring Face Face Seal Fittings, eyaziwa ngokuba namandla okutywina okukhethekileyo.

    I-Tube End Reducer iyilwe njenge-O-ring face seal efanelekile, equka i-nut, umzimba, i-O-ring kunye nomkhono.Le ndibaniselwano iqinisekisa uqhagamshelo olusebenzayo nolungenakuvuza, lubonelela ngokusebenza okuthembekileyo kunye noxolo lwengqondo.

    Enye yeenzuzo eziphambili zolu fakelo kukuguquguquka kwayo.Iyakwazi ukuhlalisa uluhlu olubanzi lweetyhubhu ezityebileyo zodonga, iyenze ilungele ukusetwa kwenkqubo yehydraulic eyahlukeneyo.Ukongeza, iyahambelana nombhobho, i-intshi ye-intshi, kunye ne-metric tubing, evumela ukuhlanganiswa okungenamthungo kwinkqubo yakho ye-hydraulic, kungakhathaliseki ukuba ulungelelwaniso olukhethiweyo.

    Eyenziwe ngentsimbi yezinga eliphezulu, le Tube End Reducer iqhayisa ngokuhlala okugqwesileyo kunye nokusebenza kwexesha elide, naphantsi kweemeko zokusebenza ezinzima.Ukwakhiwa kwayo okuqinileyo kuqinisekisa ukuba inokumelana noxinzelelo oluphezulu kunye nokuxhathisa i-corrosion, igcina ukusebenza kwayo ngexesha elide.

    Ifaka i-ORFS swivel iphela kwelinye icala kwaye ityhubhu ye-ORFS iphelela kwelinye, oku kufaneleka kwenza ukuba ufakelo olukhawulezayo nolungenamsebenzi kuyo nayiphi na inkqubo yehydraulic.Iziphelo ze-swivel zibonelela ngokuguquguquka kunye nokulula kokudibanisa, ngelixa i-tube iphela iqinisekisa ukugcinwa okukhuselekileyo kokudluliselwa kwamanzi okuthembekileyo.

    Ngoyilo lobunjineli obuphezulu kunye nokwakhiwa okuchanekileyo, oku kulungelelaniswa kuqinisekisa uxhulumaniso olukhuselekileyo noluthembekileyo, ukunciphisa imfuno yokugcinwa nokulungiswa.Ngokunciphisa umngcipheko wokuvuza kunye nokungaphumeleli kwenkqubo, inceda ukwandisa ukusebenza kunye nokusebenza kakuhle kwenkqubo yakho ye-hydraulic.

    I-Sannke yifektri ehamba phambili yokufakwa kwe-hydraulic eyaziwa ngokuzisa iimveliso ezikumgangatho ophezulu.Sizibophelele ekugqweseni, siqinisekisa ukuba izifakelo zethu zehydraulic ziyahlangabezana nemigangatho ephezulu yokusebenza kunye nokuthembeka.Ngolwazi oluthe vetshe okanye ukubuza malunga neTube End Reducer kunye nezinye izifakelo zehydraulic, nceda uqhagamshelane nathi.Khetha iSannke ngezona zisombululo zifanelekileyo zokufakwa kwehydraulic namhlanje!

  • Ngaphambili:
  • Okulandelayo:

    • IIMVELISO EZINXULUMENEYO